Reset VSC trac warning light Toyota FJ Cruiser

Leave a reply

How to reset VSC trac warning light Toyota FJ Cruiser.

Reset VSC trac warning light Toyota FJ Cruiser. From year: 2007, 2008, 2009, 2010, 2011.

The light warns that there is a problem somewhere in the following.

Vehicle stability control system.
Traction control system.
Active traction control system four−wheel drive models with rear differential lock.
AUTO LSD system two−wheel drive models.
Four-wheel drive models, and vehicles with rear differential lock-the “VSC OFF” indicator light will come on with the “VSC TRAC” warning light if there is a problem somewhere in the vehicle stability control system.

The light will come on when the ignition key turned to “ON”, and will go off after a few seconds.

The slip indicator light will come on with the “VSC TRAC” warning light if there is a problem somewhere in the following.

Traction control system.
Active traction control system four−wheel drive models with rear differential lock.
AUTO LSD system two−wheel drive models.
It is not a malfunction that the warning light may stay on for 60 seconds after the ignition key is turned to the “ON” position. Depressing the brake pedal repeatedly may turn on the lights. It is normal if they go out after a few seconds.

If the light comes on while driving, the above mentioned systems do not work. However, as conventional braking operates when applied, there is no problem to continue your driving.

In the following cases, contact your Toyota dealer:

The warning light does not come on after the ignition key is turned to “ON”.
The warning light remains on after the ignition key is turned to “ON”.
The warning light comes on while driving.
When the brake fluid level is too low, the above mentioned systems will not operate and the warning light comes on.

All information how can you reset VSC trac warning light is taken from Toyota FJ Cruiser owners manual.

Reset open door warning light Toyota FJ Cruiser

Leave a reply

How to reset open door warning light Toyota FJ Cruiser.

Reset open door warning light Toyota FJ Cruiser. From year: 2007, 2008, 2009, 2010, 2011.

This light remains on until all the side doors, back door and back window are completely closed.

To reset the open door warning light on a Toyota FJ Cruiser you must stop the car and close all doors. If the warning light don’t stop it means that at one door sensor is broken. Before starting check the doors and trunk are closed properly and no seatbelt is caught in doors.

Reset SRS airbag warning light Toyota FJ Cruiser

Leave a reply

Reset SRS airbag warning light Toyota FJ Cruiser. From year: 2007, 2008, 2009, 2010, 2011.

How to reset SRS airbag warning light Toyota FJ Cruiser.

This indicator comes on when the ignition key is turned to the “ON” position. It goes off after about 6 seconds. This means the SRS airbags and seat belt pretensioners are operating properly.

This warning light system monitors the airbag sensor assembly, front airbag sensors, side and curtain shield airbag sensors, curtain shield airbag sensors, driver’s seat position sensor, driver’s seat belt buckle switch, front passenger occupant classification system∗ and indicator light, seat belt pretensioner assemblies, inflators, interconnecting wiring and power sources. The front passenger occupant classification system includes the front passenger occupant classification ECU, load sensor and front passenger’s seat belt buckle switch.

If either of the following conditions occurs, this indicates a malfunction somewhere in the parts monitored by the warning light system. Contact your Toyota dealer as soon as possible to service the vehicle.

The light does not come on when the ignition key is turned to the “ON” position or remains on for more than 6 seconds.
The light comes on while driving.
The SRS warning light will come on and front passenger occupant classification indicator light will indicate “OFF” if there is a malfunction in the front passenger occupant classification system.

Reset automatic transmission fluid temperature warning light Toyota FJ Cruiser

Leave a reply

How to reset automatic transmission fluid temperature warning light Toyota FJ Cruiser.

Reset automatic transmission fluid temperature warning light Toyota FJ Cruiser four−wheel drive models. From year: 2007, 2008, 2009, 2010, 2011.

This light warns that the automatic transmission fluid temperature is too high.

If this light comes on while you are driving, slow down and pull off the road. To reset the automatic transmission fluid temperature warning light on your Toyota FJ Cruiser you must follow this instruction : stop the vehicle at a safe place and put the selector lever in “P”. With the engine idling, wait until the light goes off. If the light goes off, you may start the vehicle again. If the light does not go off, call a Toyota dealer or qualified repair shop for assistance.

Maintenance Oil Light Reset Acura ILX 2014

Leave a reply

How do you reset maintenance light, reset service light indicator Acura ILX, year 2014. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Acura ILX 2014, oil reset instructions:

  1. Set the power mode to ON (do not start the engine).
  2. Use the INFO (up/down) to highlight the CUSTOMIZE SETTINGS menu and select using the SEL/RESET button.
  3. Select the MAINTENANCE INFO menu using the SEL/RESET button.
  4. The oil life reset mode is displayed on the multi-information display.
  5. Select RESET with the (up/down) button, then press the SEL/RESET button. The displayed maintenance items disappear, and the engine oil life display is reset to 100%.
  6. Turn the ignition off and then start the engine to verify the indicator has been reset.