Reset charging system warning light Toyota FJ Cruiser

Leave a reply

How to reset charging system warning light Toyota FJ Cruiser.

Reset charging system warning light Toyota FJ Cruiser. From year: 2007, 2008, 2009, 2010, 2011.

This warning light comes on when the ignition key is turned to the “ON” position, and goes off when the engine is started. When there are problems in the charging system while the engine is running, the warning light comes on.

When the charging system warning light comes on while the engine is running, malfunctions such as the engine drive belt being broken may have occurred. If the warning light comes on, immediately stop the vehicle in a safe place and contact your Toyota dealer.

The charging system warning light can not be reset by using the buttons on the board this light can be reset by the Toyota dealer.

Reset low engine oil pressure warning light Toyota FJ Cruiser

Leave a reply

How to reset low engine oil pressure warning light Toyota FJ Cruiser.
Reset low engine oil pressure warning light Toyota FJ Cruiser. From year: 2007, 2008, 2009, 2010, 2011.

This light warns that the engine oil pressure is too low.If it flickers or stays on while you are driving, pull off the road to a safe place and stop the engine immediately. Call a Toyota dealer or qualified repair shop for assistance. The light may occasionally flicker when the engine is idling or it may come on briefly after a hard stop. There is no cause for concern if it then goes out when the engine is accelerated slightly. The light may come on when the oil level is extremely low. It is not designed to indicate low oil level, and the oil level must be checked using the level dipstick. If this is the problem you can reset the low engine oil pressure warning light on your Toyota FJ Cruiser by adding the oil in your engine and the light will turn off.

Do not drive the vehicle with the warning light on-even for one block. It may ruin the engine.

Reset malfunction indicator lamp Toyota FJ Cruiser

Leave a reply

How to reset malfunction Indicator Lamp Toyota FJ Cruiser.

Reset malfunction Indicator Lamp Toyota FJ Cruiser. From year: 2007, 2008, 2009, 2010, 2011.

This lamp comes on when the ignition key is turned to the “ON” position and goes off after the engine starts. This means that the warning light system is operating properly. If the lamp remains on, or the lamp comes on while driving, first check the followings.

Empty fuel tank. If the fuel tank is empty, refuel immediately.
Loose fuel tank cap If the fuel tank cap is loose, securely tighten it.
These cases are temporary malfunctions. The malfunction indicator lamp will go off after taking several driving trips. If the lamp does not go off even after several trips, contact your Toyota dealer as soon as possible.

If the fuel tank is not empty or the fuel tank cap is not loose.

There is a problem somewhere in the engine, emission control system, electronic throttle control system, automatic transmission electrical system or warning light system itself.

Contact your Toyota dealer as soon as possible to service the vehicle. If engine speed does not increase when the accelerator pedal is depressed, there may be a problem somewhere in the electronic throttle control system. At this time, vibration may occur. However, if you depress the accelerator pedal more firmly and slowly, you can drive your vehicle at low speeds. Have your vehicle checked by your Toyota dealer as soon as possible. Even if the abnormality of the electronic throttle control system is corrected during low speed driving, the system may not be recovered until the engine is stopped and the ignition key is turned to the “ACC” or “LOCK” position.

Be especially careful to prevent erroneous pedal operation.

Emissions inspection and maintenance (I/M) programs.

Your vehicle may not pass a state emission inspection if the malfunction indicator lamp remains on. Contact your Toyota dealer to check your vehicle’s emission control system and OBD (On−Board Diagnostics) system before taking your vehicle for the inspection. To reset this lamp need a special service tools.

All information how can you reset malfunction indicator lamp is taken from Toyota FJ Cruiser owners manual.

Reset low fuel level warning light Toyota FJ Cruiser

Leave a reply

How to reset low fuel level warning light Toyota FJ Cruiser.

Reset low fuel level warning light Toyota FJ Cruiser. From year: 2007, 2008, 2009, 2010, 2011.

This light comes on when the fuel level in the tank becomes nearly empty. Fill up the tank as soon as possible. On inclines or curves, due to the movement of fuel in the tank, the low fuel level warning light may come on earlier than usual.

In case the light does not go out you have problems with the probe “litrometrica”.

All information how can you reset low fuel level warning light is taken from Toyota FJ Cruiser generation owners manual.

Reset ABS service light Toyota FJ Cruiser

Leave a reply

How to reset ABS service light Toyota FJ Cruiser.

Reset ABS service light Toyota FJ Cruiser. From year: 2007, 2008, 2009, 2010, 2011.

The light comes on when the ignition key is turned to the “ON” position. If the antilock brake system and the brake assist system work properly, the light turns off after a few seconds. Thereafter, if either of the systems malfunctions, the light comes on again.

When the “ABS” warning light is on (and the brake system warning light is off), the following systems do not operate, but the brake system still operates conventionally.

Anti−lock brake system.
Brake assist system.
Traction control system.
Active traction control system
(four−wheel drive models with rear differential lock)
AUTO LSD system two−wheel drive models.
Vehicle stability control system.
When the “ABS” warning light is on (and the brake system warning light is off), the anti−lock brake system does not operate, so that the wheels will lock up during a sudden braking or braking on slippery road surfaces.

If either of the following conditions occurs, this indicates a malfunction somewhere in the components monitored by the warning light system. Contact your Toyota dealer as soon as possible to service the vehicle.

The light does not come on when the ignition key is turned to the “ON” position, or remains on.
The light comes on while you are driving.
A warning light turning on briefly during operation does not indicate a problem.

If the “ABS” warning light remains on together with the brake system warning light, immediately stop your vehicle at a safe place and contact your Toyota dealer. In this case, not only the anti−lock brake system will fail but also the vehicle will become extremely unstable during braking.

Any of the following conditions may occur, but do not indicate a malfunction:

The light may stay on for about 60 seconds after the ignition key is turned to the “ON” position. It is normal if it turns off after a while.
Depressing the brake pedal repeatedly may turn on the light. It is normal if it turns off after a few seconds.
With rear differential lock: The light comes on with rear differential locked. At this time, the anti−lock brake system, the brake assist system, the vehicle stability control system, the traction control system and the active traction control system do not operate.
All information how can you reset ABS service light is taken from Toyota FJ Cruiser owners manual.