Tag Archives: run

Reset service light oil life indicator dashboard Nissan Pathfinder

Leave a reply

How do you reset maintenance light, reset service light indicator Nissan Pathfinder, year 2014, 2015. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Nissan Pathfinder, year 2014, 2015 oil reset instructions:

  1. Turn the ignition to run (one position before starting engine/push START/STOP button once).
  2. Press the square button , located on the steering wheel to the left, to display the SETTINGS mode.
  3. Use the up/down arrow buttons to highlight SETTINGS and confirm with the ENTER button.
  4. From the SETTINGS menu select MAINTENANCE and confirm with the ENTER button.
  5. Select the maintenance item to be reset; reset distance and confirm with the ENTER button.
  6. Repeat for any other MAINTENANCE items.
  7. Turn the ignition off and then start the engine to verify the indicator has been reset.

Reset service light oil life indicator dashboard Toyota RAV4

Leave a reply

How do you reset maintenance light, reset service light indicator Toyota RAV4, year 2013, 2014, 2015. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Toyota RAV4, year 2013, 2014, 2015 oil reset instructions:

  1. Turn the ignition to run (one position before starting engine).
  2. Ensure Trip Metre A reading is shown. Turn the ignition off.
  3. While pressing the DISP button turn the igniton on (do not start the engine).
  4. Continue to press and hold the button until the trip meter displays “000000”.
  5. Turn the ignition off and then start the engine to verify the indicator has been reset.

Reset service light oil life indicator dashboard Toyota Prius

Leave a reply

How do you reset maintenance light, reset service light indicator Toyota Prius, year 2013, 2014, 2015. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Toyota Prius, year 2013, 2014, 2015 oil reset instructions:

  1. Press the “ENGINE START STOP” switch once (do not start engine) or turn ignition key to run (one position before starting engine).
  2. Ensure Trip Metre A reading is shown. Turn the ignition off.
  3. While holding the MPH or KM/H button turn the ignition on (do not start engine).
  4. Continue to press and hold the button until the trip meter displays “000000” and the display indicates the reset is complete.
  5. Turn the ignition off and then start the engine to verify the indicator has been reset.

Reset service light oil life indicator dashboard Lexus RX

Leave a reply

How do you reset maintenance light, reset service light indicator Lexus RX, year 2014, 2015. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Lexus RX, year 2014, 2015 oil reset instructions:

  1. Turn the ignition to run (push START/STOP button once). Use the trip meter switch to bring up the trip meter A reading. Turn the ignition off.
  2. While pressing the “ODO/TRIP” button, set the engine switch to run (push START/STOP button once).
  3. Continue holding the “ODO/TRIP button for about 5 seconds. The resetting procedure is complete when “000000” in the trip metre flashes once and the message in the multi information display disappears.
  4. Turn the ignition off and then start the engine to verify the indicator has been reset.

Reset service light oil life indicator dashboard Volkswagen Tiguan

Leave a reply

How do you reset maintenance light, reset service light indicator Volkswagen (VW) Tiguan, year 2014, 2015. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Volkswagen (VW) Tiguan, year 2014, 2015 oil reset instructions:

  1. Turn the ignition to run.
    *one position before starting engine
  2. Press and HOLD the trip-odometer button “0.0”.
  3. Turn your key to run (one position before starting engine).
  4. Release the trip-odometer button.
  5. Push and release the Clock Minute Set Button “min”.

or
* Use the rocker switch on the windshield wiper lever to select “Settings” and confirm with button underneath windshield wiper lever then follow steps 2a-3a.

or

  • 1a. Use the buttons on the right hand side of the multi function steering wheel
  • 2a. Select the “Settings” menu followed by the “Service” submenu. Select “Reset” and confirm.
  • 3a. Turn the ignition off and then start the engine to verify the indicator has been reset.