Tag Archives: indicator

Oil reset service light indicator Opel Vectra C

How to reset service light indicator Opel Vectra C.

Reset service light indicator Opel Vectra C. From years: 2002, 2003, 2004, 2005, 2006, 2007, 2008.

  1. Get into the car and shut all doors.
  2. Press and hold the trip reset button.
  3. Put you foot on the brake, press and hold down.
  4. Turn on the ignition to the point where all the lights come on, do not start the engine.
  5. Continue to hold the trip button and brake pedal for about 15 seconds.
  6. At this point InSP will be reset.
  7. Now you can release the trip button and brake pedal, the indicator is reset.
  8. If the above procedure does not work try this.

Second procedure how to reset service light indicator Opel Vectra C.

  1. Get into the car and shut all doors.
  2. Press and hold the trip reset button.
  3. Turn on the ignition to the point where all the lights come on, do not start the engine.
  4. Continue to hold the trip button for about 15 seconds.
  5. After that InSP will be reset.
  6. Now you can release the trip button and brake pedal, the indicator is reset.

Oil reset service light indicator Opel Astra

How to reset service light indicator Opel Astra G (Opel Astra Classic II). From years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006.

Reset service light indicator Opel Astra. From years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012.

  1. Ignition OFF.
  2. Press and hold reset trip odometer button.
  3. Turn the ignition on, one position before starting engine.
  4. The letters INSP will appear in the display for about 2 seconds.
  5. Kepp the trip odometer button pressed until the text “- – – “ appears in the display.

If the above procedure how do you reset service light indicator Opel Astra G does not work try this.

  1. Get into the car and shut the door.
  2. Press and hold the brake pedal.
  3. Press and hold the trip reset button, with the brake still pressed down.
  4. Switch ignition on, one position before starting engine.
  5. On the display will appear this message “InSP” and under InSP this “- – – -”.
  6. Continue to hold the trip button and brake pedal for about 15 seconds.
  7. At this point it should flash up InSP and then the reset mileage 19000 (in some cases instead of 19000 will appear other number, for example 15000 or 30000).
  8. You can release the trip button and brake pedal and the indicator is reset.

How do you reset service light indicator Opel Astra H (Opel Astra Classic III). From years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012.

  1. Get into the car and shut the door.
  2. Press and hold the brake pedal.
  3. Press and hold the trip reset button, with the brake still pressed down.
  4. Switch ignition on, one position before starting engine.
  5. On the display will appear this message “InSP” and under InSP this “- – – -”.
  6. Continue to hold the trip button and brake pedal for about 15 seconds.
  7. At this point it should flash up InSP and then the reset mileage 19000 (in some cases instead of 19000 will appear other number, for example 15000 or 30000).
  8. You can release the trip button and brake pedal and the indicator is reset.

If the above procedure how do you reset service light indicator Opel Astra H does not work try this.

  1. Ignition OFF.
  2. Press and hold reset trip odometer button.
  3. Turn the ignition on, one position before starting engine.
  4. The letters INSP will appear in the display for about 2 seconds. Picture below.
  5. Kepp the trip odometer button pressed until the text “- – – “ appears in the display.
  6. You can release the trip button, now the indicator is reset.

How can you reset service light indicator Opel Astra J. From years: 2009, 2010, 2011, 2012.

  1. Turn the ignition on, one position before starting engine.
  2. Press MENU button until on the display will appear vehicle information menu.
  3. Rotate the button which has on it two arrows one up one down, is located next to the MENU button, until message Remaining oil life is displayed.
  4. Pres and hold button SET/CLR, press brake pedal.
  5. Release SET/CLR button and brake pedal, switch ignition off.

Reset malfunction indicator lamp Toyota FJ Cruiser

How to reset malfunction Indicator Lamp Toyota FJ Cruiser.

Reset malfunction Indicator Lamp Toyota FJ Cruiser. From year: 2007, 2008, 2009, 2010, 2011.

This lamp comes on when the ignition key is turned to the “ON” position and goes off after the engine starts. This means that the warning light system is operating properly. If the lamp remains on, or the lamp comes on while driving, first check the followings.

Empty fuel tank. If the fuel tank is empty, refuel immediately.
Loose fuel tank cap If the fuel tank cap is loose, securely tighten it.
These cases are temporary malfunctions. The malfunction indicator lamp will go off after taking several driving trips. If the lamp does not go off even after several trips, contact your Toyota dealer as soon as possible.

If the fuel tank is not empty or the fuel tank cap is not loose.

There is a problem somewhere in the engine, emission control system, electronic throttle control system, automatic transmission electrical system or warning light system itself.

Contact your Toyota dealer as soon as possible to service the vehicle. If engine speed does not increase when the accelerator pedal is depressed, there may be a problem somewhere in the electronic throttle control system. At this time, vibration may occur. However, if you depress the accelerator pedal more firmly and slowly, you can drive your vehicle at low speeds. Have your vehicle checked by your Toyota dealer as soon as possible. Even if the abnormality of the electronic throttle control system is corrected during low speed driving, the system may not be recovered until the engine is stopped and the ignition key is turned to the “ACC” or “LOCK” position.

Be especially careful to prevent erroneous pedal operation.

Emissions inspection and maintenance (I/M) programs.

Your vehicle may not pass a state emission inspection if the malfunction indicator lamp remains on. Contact your Toyota dealer to check your vehicle’s emission control system and OBD (On−Board Diagnostics) system before taking your vehicle for the inspection. To reset this lamp need a special service tools.

All information how can you reset malfunction indicator lamp is taken from Toyota FJ Cruiser owners manual.

Reset malfunction indicator warning light Toyota Avalon

How to reset malfunction indicator warning light Toyota Avalon 3 generation.

Reset malfunction indicator warning light Toyota Avalon third generation. From year: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012.

This lamp comes on when the ignition switch is set at ON and goes off after the engine starts. This means that the warning light system is operating properly.

If the lamp remains on, or the lamp comes on while driving, first check the followings.

Empty fuel tank. If the fuel tank is empty, refuel immediately.
Loose fuel tank cap. If the fuel tank cap is loose, securely tighten it.
These cases are temporary malfunctions. The malfunction indicator lamp will go off after taking several driving trips.

If the lamp does not go off even after several trips, contact your Toyota dealer as soon as possible.

If the fuel tank is not empty or the fuel tank cap is not loose.

There is a problem somewhere in the engine, emission control system, electronic throttle control system, automatic transmission electrical system or warning light system itself.
Contact your Toyota dealer as soon as possible to service the vehicle.

If engine speed does not increase when the accelerator pedal is depressed, there may be a problem somewhere in the electronic throttle control system.
At this time, vibration may occur. However, if you depress the accelerator pedal more firmly and slowly, you can drive your vehicle at low speeds. Have your vehicle checked by your Toyota dealer as soon as possible.

Even if the abnormality of the electronic throttle control system is corrected during low speed driving, the system may not be recovered until the engine is stopped and the engine off.

Reset open door warning light Toyota Yaris second generation

How to reset open door warning light Toyota Yaris 2 generation.

Reset open door warning light Toyota Yaris second generation. From year: 2005, 2006, 2007, 2008, 2009, 2010, 2011.

Open Door Warning Light for vehicles without tachometer.

This light remains on until all the side doors and trunk are completely closed.

Door indicator light vehicles with tachometer.

This light remains on until all the doors and trunk are completely closed. The light consists of a base light (shape of the vehicle) and 5 separate lights. Each light indicates which door is open.

To turn off the open door warning light you must make sure that all doors are closed, if the indicator is still open it is possible that one of the sensors to be faulty.