Tag Archives: ignition

Reset charging system warning light Toyota FJ Cruiser

Leave a reply

How to reset charging system warning light Toyota FJ Cruiser.

Reset charging system warning light Toyota FJ Cruiser. From year: 2007, 2008, 2009, 2010, 2011.

This warning light comes on when the ignition key is turned to the “ON” position, and goes off when the engine is started. When there are problems in the charging system while the engine is running, the warning light comes on.

When the charging system warning light comes on while the engine is running, malfunctions such as the engine drive belt being broken may have occurred. If the warning light comes on, immediately stop the vehicle in a safe place and contact your Toyota dealer.

The charging system warning light can not be reset by using the buttons on the board this light can be reset by the Toyota dealer.

Reset ABS service light Toyota FJ Cruiser

Leave a reply

How to reset ABS service light Toyota FJ Cruiser.

Reset ABS service light Toyota FJ Cruiser. From year: 2007, 2008, 2009, 2010, 2011.

The light comes on when the ignition key is turned to the “ON” position. If the antilock brake system and the brake assist system work properly, the light turns off after a few seconds. Thereafter, if either of the systems malfunctions, the light comes on again.

When the “ABS” warning light is on (and the brake system warning light is off), the following systems do not operate, but the brake system still operates conventionally.

Anti−lock brake system.
Brake assist system.
Traction control system.
Active traction control system
(four−wheel drive models with rear differential lock)
AUTO LSD system two−wheel drive models.
Vehicle stability control system.
When the “ABS” warning light is on (and the brake system warning light is off), the anti−lock brake system does not operate, so that the wheels will lock up during a sudden braking or braking on slippery road surfaces.

If either of the following conditions occurs, this indicates a malfunction somewhere in the components monitored by the warning light system. Contact your Toyota dealer as soon as possible to service the vehicle.

The light does not come on when the ignition key is turned to the “ON” position, or remains on.
The light comes on while you are driving.
A warning light turning on briefly during operation does not indicate a problem.

If the “ABS” warning light remains on together with the brake system warning light, immediately stop your vehicle at a safe place and contact your Toyota dealer. In this case, not only the anti−lock brake system will fail but also the vehicle will become extremely unstable during braking.

Any of the following conditions may occur, but do not indicate a malfunction:

The light may stay on for about 60 seconds after the ignition key is turned to the “ON” position. It is normal if it turns off after a while.
Depressing the brake pedal repeatedly may turn on the light. It is normal if it turns off after a few seconds.
With rear differential lock: The light comes on with rear differential locked. At this time, the anti−lock brake system, the brake assist system, the vehicle stability control system, the traction control system and the active traction control system do not operate.
All information how can you reset ABS service light is taken from Toyota FJ Cruiser owners manual.

Reset VSC trac warning light Toyota FJ Cruiser

Leave a reply

How to reset VSC trac warning light Toyota FJ Cruiser.

Reset VSC trac warning light Toyota FJ Cruiser. From year: 2007, 2008, 2009, 2010, 2011.

The light warns that there is a problem somewhere in the following.

Vehicle stability control system.
Traction control system.
Active traction control system four−wheel drive models with rear differential lock.
AUTO LSD system two−wheel drive models.
Four-wheel drive models, and vehicles with rear differential lock-the “VSC OFF” indicator light will come on with the “VSC TRAC” warning light if there is a problem somewhere in the vehicle stability control system.

The light will come on when the ignition key turned to “ON”, and will go off after a few seconds.

The slip indicator light will come on with the “VSC TRAC” warning light if there is a problem somewhere in the following.

Traction control system.
Active traction control system four−wheel drive models with rear differential lock.
AUTO LSD system two−wheel drive models.
It is not a malfunction that the warning light may stay on for 60 seconds after the ignition key is turned to the “ON” position. Depressing the brake pedal repeatedly may turn on the lights. It is normal if they go out after a few seconds.

If the light comes on while driving, the above mentioned systems do not work. However, as conventional braking operates when applied, there is no problem to continue your driving.

In the following cases, contact your Toyota dealer:

The warning light does not come on after the ignition key is turned to “ON”.
The warning light remains on after the ignition key is turned to “ON”.
The warning light comes on while driving.
When the brake fluid level is too low, the above mentioned systems will not operate and the warning light comes on.

All information how can you reset VSC trac warning light is taken from Toyota FJ Cruiser owners manual.

Reset SRS airbag warning light Toyota FJ Cruiser

Leave a reply

Reset SRS airbag warning light Toyota FJ Cruiser. From year: 2007, 2008, 2009, 2010, 2011.

How to reset SRS airbag warning light Toyota FJ Cruiser.

This indicator comes on when the ignition key is turned to the “ON” position. It goes off after about 6 seconds. This means the SRS airbags and seat belt pretensioners are operating properly.

This warning light system monitors the airbag sensor assembly, front airbag sensors, side and curtain shield airbag sensors, curtain shield airbag sensors, driver’s seat position sensor, driver’s seat belt buckle switch, front passenger occupant classification system∗ and indicator light, seat belt pretensioner assemblies, inflators, interconnecting wiring and power sources. The front passenger occupant classification system includes the front passenger occupant classification ECU, load sensor and front passenger’s seat belt buckle switch.

If either of the following conditions occurs, this indicates a malfunction somewhere in the parts monitored by the warning light system. Contact your Toyota dealer as soon as possible to service the vehicle.

The light does not come on when the ignition key is turned to the “ON” position or remains on for more than 6 seconds.
The light comes on while driving.
The SRS warning light will come on and front passenger occupant classification indicator light will indicate “OFF” if there is a malfunction in the front passenger occupant classification system.

Reset ABS warning light Toyota Yaris second generation

Leave a reply

How to reset ABS warning light Toyota Yaris 2 generation.

Reset ABS warning light Toyota Yaris second generation. From year: 2005, 2006, 2007, 2008, 2009, 2010, 2011.

The light comes on when the ignition key is turned to the “ON” position. If the antilock brake system works properly, the light turns off after a few seconds. Thereafter, if the system malfunctions, the light comes on again. When the “ABS” warning light is on (and the brake system warning light is off), the anti−lock brake system does not operate, but the brake system still operates conventionally.

When the “ABS” warning light is on (and the brake system warning light is off), the anti−lock brake system does not operate so that the wheels could lock up during a sudden braking or braking on slippery road surfaces. If either of the following conditions occurs, this indicates a malfunction somewhere in the parts monitored by the warning light system. Contact your Toyota dealer as soon as possible to service the vehicle.

The light does not come on when the ignition key is turned to the “ON” position or remains on.
The light comes on while you are driving.
A warning light turning on briefly during operation does not indicate a problem.

If the “ABS” warning light remains on together with the brake system warning light, immediately stop your vehicle at a safe place and contact your Toyota dealer. In this case, not only the anti−lock brake system will fail but also the vehicle will become extremely unstable during braking.