Service light reset dashboard BMW with 20 pin connector

How do you reset maintenance light, reset service light BMW with 20 pin connector. For reset maintenance light and that can be made manually by use button on car dashboard.

Reset service light, engine oil life BMW with 20 pin connector, oil reset instructions:

How to reset oil maintenance light on BMW with 20 pin diagnostic port without a special tool

  1. Turn the key to the OFF position
  2. Find round diagnostic port under the hood of the vehicle and remove the cap
  3. Use a jumper wire (paper clip works really well too) to jump port numbers 7 and 19 (see diagram above)
  4. Turn the vehicle to the ON position without turning the engine on
  5. Wait 10 seconds and then remove the jumper wire with the key still in the ON position
  6. The service indicator should return to full green bars and the warning should go away

How to reset oil maintenance light on BMW with 20 pin diagnostic port without a special tool

Servive light reset oil life indicator dashboard Subaru XV Crosstrek

How do you reset maintenance light, reset service light indicator Subaru XV Crosstrek, year 2014, 2015. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Subaru XV Crosstrek, year 2014, 2015 oil reset instructions:

  1. Turn the ignition to run.
    *one position before starting engine
  2. Using the controsl on the left hand side of the steering wheel. Pull the i/Set button towards you to bring up the selection screen.
  3. Use the Up or Down arrow to highlight the MAINTENANCE menu and pull the i/Set switch towards you.
  4. Select the maintenance item (i.e. Engine Oil, Oil Filter) and pull the i/SET switch towards you.
  5. Change the next service date and interval with the Up and Down arrow and confirm by highlighting SET and pull the i/SET switch towards you. The reset is complete when the screen shows Setting Complete.
  6. Turn the ignition off and then start the engine to verify the indicator has been reset.

Servive light reset oil life indicator dashboard Lincoln MKZ

How do you reset maintenance light, reset service light indicator Lincoln MKZ, year 2014, 2015. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Lincoln MKZ, year 2014, 2015 oil reset instructions:

  1. Turn the ignition to run (one position before starting engine/ one push of START/STOP button).
  2. Using the arrow keypad (left of steering wheel) select SETTINGS.
  3. From the SETTINGS menu select VEHICLE.
  4. From the VEHICLE menu select OIL LIFE RESET followed by OK.
  5. Turn the ignition off and then start the engine to verify the indicator has been reset.

Servive light reset oil life indicator dashboard Chevrolet Camaro

How do you reset maintenance light, reset service light indicator Chevrolet Camaro, year 2014, 2015. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Chevrolet Camaro, year 2014, 2015 oil reset instructions:

  1. Turn the ignition to run.
    *one position before starting engine
  2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
  3. If the “Change Engine Oil Soon” message is not on, the system is reset. If it is on, turn the ignition off and repeat steps 1-2.
  4. Turn the ignition off and then start the engine to verify the indicator has been reset.

Guide to Resetting the Maintenance Light for Hyundai Sonata (2013-2015)

The Hyundai Sonata stands out due to its reliability and efficiency. Its advanced maintenance notification system actively reminds drivers about upcoming service needs. Regular servicing doesn’t just prolong your vehicle’s life—it ensures it performs at its best. Let’s dive into the step-by-step guide on how to reset the maintenance and service light indicators for Hyundai Sonata models between 2013 and 2015.

Guide to Resetting the Maintenance Light for Hyundai Sonata (2013-2015)

How to Reset Maintenance and Service Light: Hyundai Sonata (2013-2015)

Thinking about how to reset your Hyundai Sonata’s service light indicator and maintenance light for 2013 to 2015 models? Just follow these steps:

  1. Start the engine. If it needs servicing, you’ll see a “Service required” message.
  2. Find and press the OK button at the steering wheel’s top right for over 1 second to clear this message.
  3. The service interval will then reset to its default setting. Remember: You’ll need to activate and set the service interval feature in the INFORMATION menu first.
  4. Next, press the MODE button, which has rectangle icons. Make sure the INFORMATION menu highlights.
  5. Hit the OK button to enter the menu. Use the directional keypad to turn on the SERVICE INTERVAL mode and set your preferred interval.
  6. Turn off the ignition. Restart the engine to check if the indicator has reset.

To wrap up, it’s essential to regularly check and reset the maintenance and service light indicators in your Hyundai Sonata. By doing this, you always know what your vehicle needs. It’s a proactive step for your car’s longevity and top-notch performance. If you face any challenges or doubts, consult your vehicle’s user manual or get in touch with a Hyundai expert.