Tag Archives: the engine oil

Maintenance Minder Oil Light Reset Acura TLX 2015

How do you reset maintenance light, reset service light indicator Acura TLX, year 2014, 2015. For reset maintenance light and that can be made manually by use button on car dashboard.

Reset service light indicator, engine oil life Acura TLX 2015, oil reset instructions:

  1. Set the power mode to ON (do not start the engine).
  2. Use the scroll wheel marked (i) on the right side of the steering wheel and select MAINTENANCE INFO.
  3. Select MAINTENANCE RESET.
  4. Select RESET. The displayed maintenance items disappear, and the engine oil life display returns to 100%.
  5. Turn the power mode off and then start the engine to verify the indicator has been reset.

Reset oil service light Fiat Ducato 3

How to reset oil service light Fiat Ducato III.

Reset oil service light Fiat Ducato 3. From year: 2007, 2008, 2009, 2010, 2001, 2012, 2013, 2014.

Engine oil level gauge.

This gauge shows the engine oil level.

Versions with digital display.

Turning the ignition key to MAR, the display will show the engine oil amount by displaying five symbols.

Reset oil service light Fiat Ducato 3

Partial gradual turning off of the symbols indicates oil decrease.

If the oil level falls below the preset limit (topping up is therefore required), the five dashes will start flashing on the display.

The oil level is correct when 4 or 5 symbols are turned on. If the fifth symbol does not turn on, it shall not be considered as a failure or low oil level in the sump.

IMPORTANT Proper engine oil level shall however be checked by means of the dipstick (see paragraph “Checking levels” in section “Vehicle maintenance”).

Few seconds after, engine oil amount symbols will disappear from the display, and:

  • if scheduled servicing interval is near to come, the display will show the distance to cover and the instrument panel warning light Reset key service Fiat Ducato third generation will turn on. When reaching the scheduled servicing interval the display will show some dashes.
  • then, if engine oil change interval is near to come, the display will show on the top of the screen the distance to cover to next oil change together with message “OIL” displayed on the bottom of the screen. When reaching the scheduled servicing interval the display will show five dashes.

Versions with multifunction display.

Turning the ignition key to MARthe display will show the oil level by the turning on/off of five symbols.

Reset oil service light Fiat Ducato 3

Partial gradual turning off of the symbols indicates oil decrease. The oil level is correct when 4 or 5 symbols are turned on. If the fifth symbol does not turn on, it shall not be considered as a failure or low oil level in the sump. When the oil level falls below the preset limit the display will show the dedicated message to warn the driver that topping up is required. IMPORTANT Proper engine oil level shall however be checked by means of the dipstick (see paragraph “Checking levels” in section “Vehicle maintenance”).

Few seconds after, engine oil amount symbols will disappear from the display, and:

if scheduled servicing interval is near to come, the display will show the distance to cover and symbol Reset key service Fiat Ducato third generation. When reaching the scheduled servicing interval the display will show a dedicated message.
then, if engine oil change interval is near to come, the display will show the distance to cover to next oil change. When reaching the scheduled servicing interval the display will show a dedicated message.
All information are taken from Fiat Ducato 3 owners manual.

Reset change oil light indicator service Fiat 500

How do you reset maintenance light, reset service light indicator Fiat 500, from year: 2014, 2015. For reset maintenance light and that can be made manually by use button on car dashboard.

Reset service light indicator, engine oil life Fiat 500, oil reset instructions:

How to reset change oil indicator system Fiat 500.

  1. Turn the ignition to run (one position before starting engine).
  2. Fully depress the accelerator pedal slowly three times within 10 seconds.
  3. Turn the ignition off and then start the engine to verify the indicator has been reset.

Oil reset service light indicator Chevrolet Malibu

How do you reset oil service light Chevrolet Malibu. From years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012.

Reset oil service light Chevrolet Malibu.

The Engine Oil Life System calculates when to change the engine oil and filter based on vehicle use. Whenever the oil is changed, reset the system so it can calculate when the next oil change is required. If a situation accurs where you change the oil prior to a CHANGE OIL SOON message being turned on, reset the system.

To reset oil service light on your vehicle Chevrolet Malibu follow this steps:

  • Display OIL LIFE RESET on the dash board.
  • Press and hold the INFO button & ENTER button (in the same time) buttons for at least one second.
  • OIL LIFE RESET will display.
  • Hit ENTER button again and an ACKNOWLEDGED display message will appear for three seconds.
  • This tells you the system has been reset.
  • Turn the key to LOCK/OFF.

If the CHANGE OIL SOON message comes back on when the vehicle is started, the engine oil life system has not reset. Repeat the procedure.

Oil reset service light indicator Chevrolet Impala

How do you reset oil service light Chevrolet Impala. From years: 1999 – 2012.

Reset oil service light Chevrolet Impala. From years: 1999, 2000, 2001, 2002, 2003, 2004, 2005.

The GM Oil Life System calculates when to change your engine oil and filter based on vehicle use. Anytime your oil is changed, reset the system so it can calculate when the next oil change is required. If a situation occurs where you change your oil prior to a CHNAGE ENGINE OIL message being turned on, reset the system.

After changing the engine oil, the system must be reset.

To reset the CHANGE ENGINE OIL message use one of the folloqing procedures.

Reset oil service light Chevrolet Impala, using the radio. From years: 1999, 2000, 2001, 2002, 2003, 2004, 2005.

  • Turn the ignition to ACC or ON, with the radio off.
  • Press and hold the TUNE DISP knob on the radio for at least five seconds until SETTINGS is displayed.
  • Press the SEEK PSCAN up or down arrow to scroll through the main menu.
  • Scroll until OIL LIFE appears on the display.
  • Press the 1 PREV or 2 NEXT buttons to enter the submenu. Reset will be displayed.
  • Press the TUNE DISP knob to reset. A chime will be heard to verify the new setting and DONE will be displayed for one second.
  • Once the indicator has been reset, scroll until EXIT appears on the display.
  • Press the TUNE DISP knob to exit programming. A chime will be heard to verify the exit.
  • Turn the key to OFF.
  • If the CHANGE ENGINE OIL message comes back on when you start your vehicle, the engine oil life system has not reset. Repeat the procedure.

Reset oil service light Chevrolet Impala, using the accelerator pedal. From years: 1999, 2000, 2001, 2002, 2003, 2004, 2005.

  • Turn the ignition to ON, with the engine off.
  • Fully press and release the accelerator pedal slowly three times within five seconds. If the CHANGE ENGINE OIL message flashes, the system is reset.
  • However, if it stays on, it did not reset. Repeat the procedure.
  • Turn the key to OFF.
  • If the CHANGE ENGINE OIL message comes back on when you start your vehicle, the engine oil life system has not reset. Repeat the procedure.

All information is taken from the Chevrolet Impala manual.

How to reset oil service light Chevrolet Impala. From years: 2006, 2007, 2008, 2009, 2010, 2011, 2012.

How to Reset the Engine Oil Life System Chevrolet Impala.

The Engine Oil Life System calculates when to change your engine oil and filter based on vehicle use. Anytime your oil is changed, reset the system so it can calculate when the next oil change is required. If a situation occurs where you
change your oil prior to a CHANGE ENGINE OIL SOON message being turned on, reset the system.

Always reset the engine oil life to 100% after every oil change. It will not reset itself. To reset the Engine Oil Life System for Chevrolet impala, do the following:

  • Display the OIL LIFE REMAINING on the DIC.
  • Press and hold the SET/RESET button on the DIC for more than five seconds. The oil life will change to 100%.
  • If the CHANGE ENGINE OIL SOON message comes back on when you start your vehicle, the Engine Oil Life System has not reset. Repeat the procedure.

All information is taken from the Chevrolet Impala manual.