Tag Archives: OIL LIGHT RESET

Oil light reset maintenance Buick LeSabre

Reset service light indicator, engine oil life Buick LeSabre, year 1991-2005 reset instructions:

1. Turn the ignition to run (one position before starting engine).
2. Use a paperclip to push and hold the RESET button for 5 seconds. The CHANGE OIL SOON indicator
flashes to indicate the system is reset.
3. Turn the ignition off and start the engine to verify the indicator has been reset.
*The RESET button is under the passenger side glove compartment.

 

Oil light reset maintenance Buick LaCrosse

Reset service light indicator, engine oil life Buick LaCrosse, year 2005, 2006-2010, 2011-2013 reset instructions:

2005

1. Turn the ignition to run (one position before starting engine).
2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
3. If the CHANGE OIL SOON indicator flashes
engine and repeat steps).
4. Turn the ignition off and start the engine to verify the indicator has been reset.

2006-2010

With Driver Information Centre (DIC):
1. Turn the ignition to run (one position before starting engine).
2. Press the OPTION button on the DIC until ENGINE OIL MONITOR appears on the DIC screen.
3. Press the SET/RESET button to reset the system. The next screen indicates that the CHANGE OIL SOON message has been reset. If the vehicle has the up level DIC, when the gauges button is pressed and the OIL LIFE REMAINING mode appears, it should read 100% OIL LIFE REMAINING.
4. Turn the ignition off and start the engine to verify the indicator has been reset.

Without Driver Information Centre:
1. Turn the ignition to run (one position before starting engine).
2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
3. If the CHANGE OIL SOON indicator flashes, the system is reset (if this does not happen, turn off the
engine and repeat steps).
4. Turn the ignition off and start the engine to verify the indicator has been reset.

2011-2013

1. Turn the ignition to run (one position before starting engine).
2. Press the DIC menu button on the turn signal lever to enter the vehicle information menu. Use the thumbwheel to scroll through the menu items until you reach REMAINING OIL LIFE.
3. Press the SET/CLR button to reset the oil life to 100%.
4. Turn the ignition off and start the engine to verify the indicator has been reset.

Oil light reset maintenance Buick Century

Reset service light indicator, engine oil life Buick Century, year 1998-2005 reset instructions:

1. Turn the ignition to run (one position before starting engine).
2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
3. If the CHANGE OIL SOON indicator flashes
4. Turn the ignition off and start the engine to verify the indicator has been reset.

Service light reset indicator for BMW X5 2002

Reset service light indicator, engine oil life BMW X5 year 2002 reset instructions:

BMW X5 Engine Oil Service reset

Turn the ignition to “0”
Press and hold odometer button and turn the ignition to “1”.
Hold odometer button pressed for approximately 5 seconds until the display shows: “Inspektion Re /
Release and press odometer button again until Reset flashes
Release and press odometer button shortly.
Release and press odometer button again.
The next oil service interval will be shown and will disappear.
Oil service lamp is now reset

Note: To abort the procedure at any time: turn the ignition to “0”.

Reset the service light on a 2002 Rover 75

There are 3 stages
locate the obd plug and find pin 8 then
turn ignition to pos 2
with a fused wire ( a piece of wire with a fuse in it)
ground pin 8 for 4-5 seconds
turn ignition off
repeat this procedure 2 more times but for 8-12 seconds and then the service indicator will be reset.