Category Archives: Service light reset Toyota

Oil reset, oil light indicator, maintenance light reset, service light reset, without using a computer for Toyota

Toyota Land Cruiser 100 series reset SRS airbag warning light

How to reset SRS airbag warning light Toyota Land Cruiser 100 series.

Reset SRS airbag warning light Toyota Land Cruiser 100 series. From year: 2002, 2003, 2004, 2005, 2006, 2007.

This indicator comes on when the ignition key is turned to the “ON” position. It goes off after about 6 seconds. This means the SRS airbags and seat belt pretensioners are operating properly.

The warning light system monitors the airbag sensor assembly, front airbag sensors, side and curtain shield airbag sensor assemblies, curtain shield airbag sensor assemblies, driver’s seat position sensor, driver’s seat belt buckle switch, front passenger occupant classification system and indicator light, front passenger’s seat belt buckle switch, seat belt pretensioner assemblies, inflators, roll sensing of curtain shield airbags off indicator light, interconnecting wiring and power sources.

If any of the following conditions occurs, this indicates a malfunction of the airbags or seat belt pretensioners. Contact your Toyota dealer as soon as possible.

  • The light does not come on when the ignition key is turned to the “ON” position or remains on for more than 6 seconds or flashes.
  • The light comes on or flashes while driving.

The SRS warning light will come on and front passenger occupant classification indicator light will indicate “OFF” if there is a malfunction in the front passenger occupant classification system.
All information how to reset SRS airbag warning light is taken from Toyota Land Cruiser 100 series owners manual.

Toyota Land Cruiser 100 series reset low fuel level warning light

How to reset low fuel level warning light Toyota Land Cruiser 100 series.

Reset low fuel level warning light Toyota Land Cruiser 100 series. From year: 2002, 2003, 2004, 2005, 2006, 2007.

This light comes on when the fuel level in the tank becomes nearly empty. To reset this light you must fill up the tank as soon as possible and the warning light will go off.

Al infromation are taken from Toyota Land Cruiser 100 series owners manual.

That it is the full procedure how to reset low fuel level warning light Toyota Land Cruiser 100 series. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Toyota cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders by yourself.

Toyota Land Cruiser 100 series reset charging system warning light

How to reset charging system warning light Toyota Land Cruiser 100 series.

Reset charging system warning light Toyota Land Cruiser 100 series. From year: 2002, 2003, 2004, 2005, 2006, 2007.

This warning light comes on when the ignition key is turned to the “ON” position, and goes off when the engine is started. When there are problems in the charging system while the engine is running, the warning light comes on.

When the charging system warning light comes on while the engine is running, malfunctions such as the engine drive belt being broken may have occurred. If the warning light comes on, immediately stop the vehicle in a safe place and contact your Toyota dealer. if the belt is broken the light will be reset after you change the belt, then the charging system warning light will go off.

That it is the full procedure how to reset charging system warning light Toyota Land Cruiser 100 series. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Toyota cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders by yourself.

Reset seat belt reminder light Toyota Land Cruiser 100 series

How to reset seat belt reminder lightt Toyota Land Cruiser 100 series.

Reset seat belt reminder lightt Toyota Land Cruiser 100 series. From year: 2002, 2003, 2004, 2005, 2006, 2007.

Driver’s seat belt reminder light and buzzer.

The light and buzzer act as a reminder to buckle up the driver’s seat belt. Once the ignition key is turned to “ON” or “START”, the reminder light flashes and the buzzer sounds if the driver’s seat belt is not fastened. Unless the driver fastens the belt, the light continues flashing and the buzzer sounds 4 to 8 seconds. If the light stay on after you connected the belt you may have a problem with the airbag or with the sensor.

Front passenger’s seat belt reminder light.

The light acts as a reminder to have the front passenger buckle up the seat belt. Once the ignition key is turned to “ON” or “START”, the reminder light flashes if a passenger sits in the front passenger seat and does not fasten the seat belt. Unless the front passenger fastens the belt, the light continues flashing. If luggage or other load is placed on the front passenger seat, depending on its weight and how it is placed on the seat, built−in sensors in the seat cushion may detect the pressure, causing the reminder light to flash.

To reset the seat belt reminder light Toyota Land Cruiser 100 series you must go to a authorized dealer to reset this warning light for you.

All information are taken from Toyota Land Cruiser 100 series owners manual.

Reset odometer and two trip meters Toyota Land Cruiser 100 series

How to reset odometer and two trip meters Toyota Land Cruiser 100 series.

Reset odometer and two trip meters Toyota Land Cruiser 100 series. From year: 2002, 2003, 2004, 2005, 2006, 2007.

Reset-odometer-and-two-trip-meters-Toyota-Land-Cruiser-100-series

 

 

 

 

 

 

 

This meter displays the odometer and two trip meters.

  1. Odometer-Shows the total distance the vehicle has been driven.
  2. Two trip meters-Show two different distances independently driven since the last time each trip meter was set to zero. You can use one trip meter to calculate the fuel economy and the other to measure the distance on each trip. All trip meter data is cancelled if the electrical power source is disconnected.
  3. Trip meter reset knob-Resets the two trip meters to zero, and also change the meter display. To change the meter display, quickly push and release the knob. The meter display changes in the order from the odometer to trip meter A to trip meter B, then back to the odometer each time you push. To reset the trip meter A to zero, display the meter A reading, then push and hold the knob until the meter is set to zero. The same process can be applied for resetting the trip meter B.

All information how to reset odometer and two trip meters is taken from Toyota Land Cruiser 100 series owners manual.