Category Archives: Service light reset Skoda

Oil reset, oil light indicator, maintenance light reset, service light reset, without using a computer for Skoda

Oil reset service light indicator Skoda Yeti

How to reset service light indicator Skoda Yeti.

Reset service light indicator Skoda Yeti. From year: 2009, 2010, 2011, 2012, 2013.

oil-reset-service-light-indicator-Skoda-Yeti

Service now!

Displaying the distance and days until the next service maintenance. You can use the button 3 to display the remaining distance and days until the next service maintenance, see above picture.

A key symbol Skoda-key-service Skoda key service and the remaining distance appear for 10 seconds in the display. At the same time, the remaining days until the next service maintenance are displayed.

On cars which are equipped with the information display, you can call up this display in the menu Settings, see info below.

The following will be displayed in the information display for 10 seconds:
Service in … km or… days.

Resetting Service Interval Display Skoda Yeti.

It is only possible to reset the Service Interval Display, if a service message or at least a pre-warning is shown in the instrument cluster display.

We recommend that this reset is completed by a specialist garage.
The specialist garage:

  • resets the memory of the display after the appropriate inspection;
  • adds an entry to the Service Schedule;
  • affix the sticker with the entry of the following service interval to the side of the dash panel on the driver’s side.
  • Reset the service interval display by using the reset button 7, see above picture.

On vehicles which are equipped with the information display, you can reset the Service Interval Display in the menu Settings, see info below.

We recommend that you do not reset the Service Interval Display yourself as this can result in the incorrect setting of the Service Interval Display, which can also cause possible problems with the operation of your vehicle.

  • Never reset the display between service intervals, as this will result in the incorrect display.
  • Information is retained in the Service Interval Display also after the battery of the vehicle is disconnected.
  • If the instrument cluster is exchanged after a repair, the correct values must be entered in the counter for the Service Interval Display. This work is carried out by a specialist garage.
  • After resetting the display with flexible service intervals, the displayed data is the same as that for a vehicle with fixed service intervals. We therefore recommend that the Service Interval Display is only reset by a ŠKODA Service Partner, who will reset the display with a vehicle system tester.
  • Please refer to the Service Plan for detailed information about the service intervals.

Reset-service-light-indicator-Skoda-Superb-2
Operating with the buttons on the windshield wiper lever.

  • You can activate the Main menu by pressing the rocker switch A, for more than 1 second.
  • Individual menu points can be selected by means of the rocker switch A . When the pushbutton B is briefly pressed, the information you have selected is displayed.

Operating with the buttons on the multifunction steering wheel.

  • You can activate the Main menu by pressing the rocker switch C for more than 1 second.
  • By briefly pressing the C button you will reach one level higher.
  • The individual menus can be selected by pressing the adjustment wheel D.
  • The selected menu is displayed after briefly pressing the adjustment wheel D.

The following information can be selected (depending on the equipment installed on the vehicle):

  • MFD
  • Audio
  • Navigation
  • Phone
  • Aux. Heating
  • Assistants
  • Vehicle status
  • Settings

Note:

  • If warning messages are shown in the information display, these messages must be confirmed with the button B on the windshield wiper lever or with the button D on the multifunction steering wheel to call up the main menu.
  • If the information display is not activated at that moment, the menu always shifts to one of the higher levels after approx. 10 seconds.
  • The operation of the factory-fitted radio or navigation system is described in separate operating instructions to be found in the on-board literature.

You can change certain settings by means of the information display. The current setting is shown on the information display in the respective menu at the top below the line.

The following information can be selected (depending on the equipment installed on the vehicle):

  • Language
  • MFD Data
  • Convenience
  • Lights & Vision
  • Time
  • Winter tyres
  • Units
  • Assistants
  • Alternative speed displayed
  • Service
  • Factory setting
  • Back

After selecting the menu point Back you will reach one level higher in the menu.

Service
Here you can have the remaining kilometres and days until the next service interval displayed, and reset the Service Interval Display.

Oil reset service light indicator Skoda Roomster

How to reset service light indicator Skoda Roomster.

Reset service light indicator Skoda Roomster. From year: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013.

oil-reset-service-light-indicator-Skoda-Fabia-Mk2

 

 

 

 

 

 

The distance which you have driven with your Skoda Roomster is shown in kilometres (km). In some countries the measuring unit “mile” is used.

Reset button Skoda Roomster.
Press the button 6 for more than 1 second to reset the display of the daily trip counter.

Daily trip counter (trip).

The daily trip counter indicates the distance which you have driven since it was last reset – in steps of 100 metres or 1/10 of a mile.

Odometer
The odometer indicates the total distance in kilometres or miles which the vehicle has been driven.

Fault display.
If there is a fault in the instrument cluster Error will appear continuously in the display. Ensure the fault is rectified as soon as possible by a specialist workshop.

If vehicles which are fitted with the information display the display of the second speed is activated in mph or km/h, this driving speed is indicated instead of the counter for the total distance driven.

Resetting Service Interval Display Skoda Roomster.

It is only possible to reset the Service Interval Display, if a service message or at least a pre-warning is shown in the instrument cluster display.

You can reset the service interval display by using the reset button 6.

On vehicles which are equipped with the information display, you can reset the service interval display in the menu Settings.

  • Never reset the display between service intervals, as this will result in the incorrect display.
  • Information is retained in the Service Interval Display also after the battery of the vehicle is disconnected.
  • If the instrument cluster is exchanged after a repair, the correct values must be entered in the counter for the Service Interval Display. This work is carried out by a specialist garage.
  • After resetting the display with flexible service intervals, the displayed data is the same as that for a vehicle with fixed service intervals. We therefore recommend that the Service Interval Display is only reset by a ŠKODA Service Partner, who will reset the display with a vehicle system tester.
  • Please refer to the Service Plan for detailed information about the service intervals.

Reset-oil-service-light-Skoda-Fabia-Mk2

 

 

 

 

 

Reseting
Select the desired memory.
Push and hold the button B, for longer than one second.

The following readouts of the selected memory will be set to zero by button B:

  • Average fuel consumption;
  • Distance driven;
  • Average speed;
  • Driving time.

You can activate the Main menu by pressing the rocker switch A, for more than 1 second.

Individual menu points can be selected by means of the rocker switch A . When the pushbutton B is briefly pressed, the information you have selected is displayed.

The following information can be selected (depending on the equipment installed on the vehicle):

  • MFD
  • Audio
  • Navigation
  • Phone
  • Vehicle status
  • Settings

The menu points Audio and Navigation are only displayed when the factory-fitted radio or navigation system is switched on.

If warning messages are shown in the information display, these messages can be confirmed with the button B, on the windshield wiper lever in order to call up the main menu.

If the information display is not activated at that moment, the menu always shifts to one of the higher levels after 10 seconds.

Settings Skoda Roomster.

You can change certain settings by means of the information display. The current setting is shown on the information display in the respective menu at the top below the line.

The following information can be selected (depending on the equipment installed on the vehicle):

  • Language
  • MFD Data
  • Time
  • Winter tyres
  • Units
  • Alternative speed displayed
  • Service
  • Factory Setting
  • Back

After selecting the menu point Back you will reach one level higher in the menu.

Language
This is where the language in which the warning and information texts should be displayed can be set.

Displays of the MFA
This is where certain displays of the multi-functional indicator can be switched on or off.

Time
The time, time format (12 or 24 hour indicator) and the changeover between summer/ winter time can be set here.

Winter tyres
This where the speed at which a warning signal should sound can be set. This function is, for example, used for winter tyres with which the permissible maximum speed is lower than the maximum speed of the vehicle.
When exceeding the speed, the following is shown on the information display:
Winter tyres: max. speed … km/h

Measures
The units for the temperature, consumption and distance driven can be set here.

Second speed
The display of the second speed in mph or in km/h can be switched on here.

Service Skoda Roomster.
Here you can have the remaining kilometres and days until the next service interval displayed, and reset the Service Interval Display.

Factory Setting
After selecting the menu Factory setting the factory setting of the information display is restored.

Reset service light indicator Skoda Citigo

How to reset service light indicator Skoda Citigo.

Before the next service interval the messsage InSP appears for some seconds and the remaining kilometres are indicated after switching on the ignition.

At the time of the service, an acoustic signal will sound and the message InSP appears for a few seconds after switching on the ignition.

Resetting Service Light Interval display:

resets the display memory after the relevant inspection.
makes an entry in the Service schedule.
affix the sticker with the entry of the following service interval to the side of the dash panel on the driver‘s side.

Reset driving time indicator Skoda Citigo

Reset driving time indicator Skoda Citigo. From year: 2011, 2012, 2013.
Reset-service-Skoda-Citigo
1. The rocker switch A and the button B are located on the windscreen wiper lever.
2. Select memory.
3. Depress button B.
4. Selecting functions.
5. Briefly push the rocker switch A down or up, this opens the individual functions of the multifunction display one after the other.
6. Resetting, select the driving time indicator.
7. Push the button B for a few seconds.
8. The following readouts of the selected memory will be set to 0 by button B.

How to reset service light indicator Skoda Superb 1

1. Get in the car, with the ignition to off position
2. Press and hold right button on the dashboard.
3. Switch the ignition to on, do not start the vehicle.
4. Release, right button.
5. Now turn button located on the left on dash to the right in clockwise direction.
6. The service indicator was reset.