Category Archives: Service light reset Jeep

Oil reset, oil light indicator, maintenance light reset, service light reset, without using a computer for Jeep

Oil reset service light indicator Jeep Liberty

How do you reset maintenance light, reset service light indicator Jeep Liberty, year 2008, 2009, 2010, 2011, 2012. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Jeep Liberty, oil reset instructions:

  1. Turn the ignition to run (one position before starting engine).
  2. Fully depress the accelerator pedal slowly three times within 10 seconds.
  3. Turn the ignition off and then start the engine to verify the indicator has been reset.

Oil reset service light indicator Jeep Grand Cherokee

How do you reset maintenance light, reset service light indicator Jeep Grand Cherokee, year 2008, 2009, 2010, 2011, 2012, 2013, 2014. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Jeep Grand Cherokee, oil reset instructions:

  1. Turn the ignition to run (one position before starting engine).
  2. Fully depress the accelerator pedal slowly three times within 10 seconds.
  3. Turn the ignition off and then start the engine to verify the indicator has been reset.

Oil reset service light indicator Jeep Compass

How do you reset maintenance light, reset service light indicator Jeep Compass, year 2008, 2009, 2010, 2011, 2012, 2013, 2014. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Jeep Compass, oil reset instructions:

  1. Turn the ignition to run (one position before starting engine).
  2. Fully depress the accelerator pedal slowly three times within 10 seconds.
  3. Turn the ignition off and then start the engine to verify the indicator has been reset.

Oil light reset Jeep Renegade Concept

Many Jeep vehicles track the intervals between oil changes to alert the driver when the next oil change is needed. A light illuminates on the control panel when the internal system determines it is time for an oil change. Most Jeep mechanics reset the oil light as part of the oil change service. If you change the oil in your Jeep yourself, you can manually reset the oil light. Resetting the oil light after an oil change allows the system to accurately track the time until the next oil change is needed. The procedures described in this article apply to 2010 Jeep models.

Instructions

1.Turn the ignition switch to the “ON” position. Do not start the engine.

2.Press the accelerator pedal completely to the floor slowly three times within a 10-second span.

3.Turn the ignition switch to the “OFF” position.

4.Turn the ignition switch to the “ON” position again. The oil light should be off. If the oil light is still illuminated, repeat the previous steps.

Oil service reset Jeep Cherokee SRT8

On my ’08 I just had the oil change indicator come on, and I successfully reset it. The point is that the message took a few seconds after turning the key on to appear in the dash. You need to wait until the message appears, then you have 10 seconds to do the 3 pedal depresses. It doesn’t work if you start depressing the pedal immediately after turning the key on, if you don’t wait for the oil change message to appear.