Category Archives: Service light reset BMW

Oil reset, oil light indicator, maintenance light reset, service light reset, without using a computer for BMW

Service light reset dashboard BMW X5 and BMW X6

How do you reset maintenance light, reset service light indicator BMW X5 and BMW X6, year 2000-2013. For reset maintenance light and that can be made manually by use button on car dashboard.

Reset oil service light, engine oil life BMW X5 and BMW X6, year 2000-2013 oil reset instructions:

  1. Turn the ignition to the ON position with the vehicle off (close all doors and windows and put the vehicle in park)
  2. Press and hold the TRIP reset button for about 10 seconds until the first service job appears in the display
  3. Release the button and press it again repeatedly to select the desired maintenance item to reset (oil can indicates the oil change)
  4. To reset, press and hold the TRIP button again fro 3-5 seconds or until the display shows “Reset?”
  5. Release the button, then press and hold it again for another 3 seconds or until the display shows “—-”, then release the button
  6. Repeat the above procedure for any other services to be reset e.i., brakes, spark plugs, or filters
  7. Turn the ignition to the OFF position and back on to confirm reset was successful

Service light reset dashboard BMW with 20 pin connector

How do you reset maintenance light, reset service light BMW with 20 pin connector. For reset maintenance light and that can be made manually by use button on car dashboard.

Reset service light, engine oil life BMW with 20 pin connector, oil reset instructions:

How to reset oil maintenance light on BMW with 20 pin diagnostic port without a special tool

  1. Turn the key to the OFF position
  2. Find round diagnostic port under the hood of the vehicle and remove the cap
  3. Use a jumper wire (paper clip works really well too) to jump port numbers 7 and 19 (see diagram above)
  4. Turn the vehicle to the ON position without turning the engine on
  5. Wait 10 seconds and then remove the jumper wire with the key still in the ON position
  6. The service indicator should return to full green bars and the warning should go away

How to reset oil maintenance light on BMW with 20 pin diagnostic port without a special tool

Reset service light oil life indicator dashboard BMW X1

How do you reset maintenance light, reset service light indicator BMW X1, year 2014, 2015. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life BMW X1, year 2014, 2015 oil reset instructions:

  1. Press the start/stop button once (do not start the engine)
  2. Press and hold the Set/Reset button until the service indicator light appears. Press the Set/Reset button repeatedly to scroll the service menu.
  3. With the oi change interval highlighted, press and hold the Set/Reset button. When Reset appears, release the Set/Reset button and press and hold again.
  4. Reset complete when OK and new mileage appears.
  5. Turn the ignition off. Start the engine to verify the indicator has been reset.

Reset service light oil life indicator dashboard BMW 2 Series

How do you reset maintenance light, reset service light indicator BMW 2 Series, year 2014, 2015. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life BMW 2 Series, year 2014, 2015 oil reset instructions:

  1. Press the start/stop button once (do not start the engine)
  2. Press and hold the Set/Reset button until the service indicator light appears. Press the Set/Reset button repeatedly to scroll the service menu.
  3. With the oi change interval highlighted, press and hold the Set/Reset button. When Reset appears, release the Set/Reset button and press and hold again.
  4. Reset complete when OK and new mileage appears.
  5. Turn the ignition off. Start the engine to verify the indicator has been reset.

Reset service light oil life indicator dashboard BMW 3 Series

How do you reset maintenance light, reset service light indicator BMW 3 Series , year 2014, 2015. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life BMW 3 Series , year 2014, 2015 oil reset instructions:

  1. Press the start/stop button once (do not start the engine)
  2. Press and hold the Set/Reset button until the service indicator light appears. Press the Set/Reset button repeatedly to scroll the service menu.
  3. With the oil change interval highlighted, press and hold the Set/Reset button. When Reset appears, release the Set/Reset button and press and hold again.
  4. Reset complete when OK and new mileage appears.
  5. Turn the ignition off. Start the engine to verify the indicator has been reset.